Sliding Plantation Shutters Gold Coast — Made to Measure & Professionally Installed.
Sliding plantation shutters — also called bypass shutters — are made for sliding doors and wide openings. Panels glide past each other on a track, so you get the look and light control of plantation shutters on doors where hinged panels won’t work. Made in PVC in our Currumbin Waters factory, custom sized and installed by our own Gold Coast team.
Shutters for your sliding doors.
Sliding shutters bring the clean lines of plantation shutters to doors and wide openings — with louvres for everyday light control and panels that slide away when you want to step outside.
Made for Sliding Doors
Panels run on a track and follow the doors behind them — ideal where hinged panels have no room to swing.
Light & Privacy
Tilt the louvres to let light in or close the room off, then slide the panels clear when you want the full view.
Naturally Cordless
No cords to worry about, which makes sliding shutters a safe choice for homes with kids and pets.
Moisture-Resistant PVC
PVC won’t swell, warp or peel in humidity — a durable, low-maintenance alternative to timber.
Built for doors and wide openings.
Every sliding shutter is custom sized and custom painted, with quality track hardware — and hinged shutters for your standard windows.
Sliding Panels
Sliding doors
Wide Openings
Panels stack aside
Custom Painted
Paint booth finish
Prefer Hinged?
Standard windows
Pick by your opening
- Sliding doors — sliding panels that follow the doors
- Wide openings — bypass panels that stack aside
- No room to swing — sliding instead of hinged
- Standard windows — hinged shutters
Quality hardware
The moving parts matter most on a sliding shutter, especially near the salt air. Our sliding tracks, wheels and runners are sourced from Australia’s leading architectural door hardware manufacturer, and every unit is custom painted in our paint booth.
Not sure if sliding or hinged suits your opening?
Get expert advice →Local since 1996. Factory direct. Backed by 50+ years of combined experience.
Your shutters are measured, made and installed by the same Gold Coast team. About us.
We Actually Make Them
Factory direct from Currumbin Waters — no middleman markup and no offshore quality lottery.
See It Before You Buy
Our consultant brings shutter samples to your home so you can see the louvres, frames and finish in your own light.
In-House Installers
Our own local installers hang every panel and tune every louvre before they leave.
Sliding plantation shutters across the Gold Coast — installed locally.
You’ll find our installers from Burleigh Heads to Tweed Heads, Coolangatta to Currumbin, and right down to Byron Bay.
Three steps. Approx. four to five weeks. Done.
From first call to fitted shutters in approx. 4–5 weeks — Australian made, not imported.
Free Measure & Quote
Our consultant measures every window, brings shutter samples, and recommends the right panel layout and track — then leaves you with a fixed written quote.
Made in Currumbin Waters
Your shutters are built and finished in our own factory — custom sized, colour-matched and quality-checked.
Professional Installation
Once your shutters are manufactured, we’ll confirm the exact install date in writing. Our installer fits the track, hangs every panel and checks they glide smoothly.
How much do sliding plantation shutters cost?
Why are sliding shutters called bypass shutters?
How big can sliding shutters be?
Can sliding shutters go on patio doors?
Hinged or sliding shutters?
What warranty comes with sliding shutters?
How do I clean sliding shutters?
The shutter, tracks, warranty & care.
What goes into a sliding PVC shutter, how the track works, our warranty, and looking after your shutters.
PVC, reinforced and made here.
- Material: PVC — doesn’t swell, warp or fade the way natural materials can
- Reinforced: aluminium-reinforced blades and stiles help stop panels sagging over time
- Moisture: water resistant — built for bathrooms, ensuites and laundries
- Termite & fire resistant: synthetic all the way through
- Finish: custom colour-matched in our Currumbin Waters factory
Bypass panels on a track.
Sliding panels
- Panels run on top tracks and slide past each other (bypass)
- They follow the sliding doors behind them, so you can open the door without moving the shutter out of the way first
- Adjustable louvres set light and privacy without moving the panels
Hardware
- Sliding tracks, wheels and runners from Australia’s leading architectural door hardware manufacturer
- Chosen for the salt air on the Gold Coast
Size
- Up to 6m wide and 3m high — large panels are heavy, so we confirm suitability at your measure
Made here, so serviced here.
- PVC shutters: 15-year warranty
- Hardware: 5 years
- Installation workmanship: 5 years
Because we manufacture your shutters in our own Currumbin Waters factory, servicing them is straightforward — no offshore supplier to chase.
See our warranty page for full terms.
A dust and a wipe.
Everyday
- Dust along the louvres with a soft dry cloth, feather duster or vacuum brush
- Tilt the louvres flat to get both faces in one pass
When it needs more
- Wipe down with mild soap and water, then dry with a clean cloth
- Use a soft brush around the frame and along the track where dust collects
Best avoided
- Harsh solvents, bleach or abrasive pads
- Forcing a panel that catches — check the track first, or book a service
Lock in your free, no-obligation measure.
Free in-home measure, shutter samples and a fixed-price written quote on the spot — handled by the same local team who’ll make and install your shutters. Australian made, fitted in approx. 4–5 weeks.
